Stainless-Steel Push-In Pneumatic Fittings Speed Controller

Push-In Pneumatic Fittings

SUS304 Push to Connect Pneumatic Fitting, One Touch Pneumatic Fitting

Push-in Pneumatic Flow Control Valve is also known as Speed Controller. The purpose is to control the flow volume of liquid and gas/air. Push-in Pneumatic Speed Controller is widely used to regulate the flow on the air/pneumatic systems or hydraulic actuating gears. Speed Controller is generally divided into two types: one-direction and two-direction. Our Speed Controller is two-direction flow control valve. The controller is designed for the flow adjustment in two-direction through the needle valve to ensure the constant flow rate.

Features

  • Leak-free sealing technology.
  • Fast installation.
  • Easy use.
  • Space-saving.
  • Material: SUS304, SUS316 (Corrosive resistance)

Technical Data

  • Working Pressure: 10 kgf/cm² *
  • Working Temperature: -20°C ~ 80°C *
  • Suitable OD: 4 ~ 12 mm
  • Thread: PT, NPT, M
  • The suitability of fittings depends on the plastic tube type and outside diameter.
Application
  • Suitable for Component Assembly of Instrumentation, Food, Chemical, Petrochemical Industries, Water Treatment, Medical Equipment and Agriculture Machines.

Specification

Push-in Pneumatic Fittings Speed Controller

 

Part No TUBE OD THREAD SIZE Dimensions ❒SQUARE
Ø P-PT I L L1 ØB
  6 1/8" 7 38.5 34.25 13.4 16
  6 1/4" 11 44.5 34.25 13.4 16
  8 1/8" 7 38.5 35.85 15 16
  8 1/4" 11 44.5 35.85 15 16
  10 1/4" 11 53.3 41.45 18 20
  10 3/8" 12 54.3 41.45 18 20
Back