316 Stainless Steel Tube Fittings Union Tee
Tube Fittings
316 stainless steel two ferrules tube fittings union tee, 316 stainless steel double ferrules compression tube fitting union tee, 316 ferrules union tee
316 stainless steel tube fitting union tees are also called equal tee or just tee. It means three ports have the same outside diameter(O.D.) to allow the same size tube to go through. They are widely used in instrumentation, liquid and gas tubing. They are suitable for food and medical equipment subject to special treatment.
Tube fitting union tees are designed to enable liquid and gas to flow in from one port and flow out at different direction of 90-degree or 180-degree. Three ends apply double-ferrule metal sealing for the connection of stainless-steel tube to achieve the free flow of liquid and gas. It is used as the diversion port in pipelines.
All parts of tube fittings are made of 316 stainless steel, constructed by body, back and front ferrules, and nut. provides various configurations of tube fittings for selection, including straights, 90-degree elbows, tees, bulkheads, nuts, ferrules, plugs, and caps. Nut threads are electroplated to prevent wear and improve smoothness for easier installation.
Features
- Double-ferrule metal to metal sealing, leak-free design.
- Nut threads are electroplated to reach wear resistance.
- 316 stainless steel material features resistance to heat, impact, and corrosion.
Technical Data
Working Pressure:
(1) 1/2 inch (12mm) Below: 210 kgf/cm²
(2) 3/4 inch (19mm) Above: 100 kgf/cm²
Suitable Tube O.D.: 1/8 ~ 1 inch ; 3 ~ 25mm
Thread: PT, NPT, M
Customized size is also acceptable.
Application
- Suitable for Instruments, Meters, Piping Engineering, Low Pressure and High Temperature Pneumatic Pipelines, Medical Equipment, Agricultural Appliances, Mechanical Parts Assembly, Food Industry, Chemical Plant, Petrochemical Plant, Water Treatment Industry.
Dimension
Specification
Tube Fittings Union Tee
| Part No | TUBE OD | DIMENSIONS | H | H | ||
|---|---|---|---|---|---|---|
| Ø | Ø E | F | L | |||
| ET01OD01OD | 1/8" | 2.4 | 13.2 | 26.3 | 12 | 11.5 |
| ET02OD02OD | 1/4" | 4.8 | 15.5 | 31 | 14 | 14.5 |
| ET03OD03OD | 3/8" | 7 | 17.2 | 33.5 | 17 | 18.6 |
| ET04OD04OD | 1/2" | 10.5 | 23 | 42 | 22 | 22.7 |
| ET05OD05OD | 5/8" | 12.7 | 24.9 | 46.1 | 27 | 27.5 |
| ET06OD06OD | 3/4" | 16 | 24.6 | 45.8 | 28.6 | 27.5 |
| ET08OD08OD | 1" | 22 | 30.8 | 53.3 | 38 | 34 |